Hybrid Resins

Longcester ® Typical Properties For Hybrid Resins
Product
Ratio
Acid Value
mgKOH/g
Viscosity
200℃mPa.S
Tg
Cure Cycle
Tribo
Gas
oven
Properties
TDS
SDS
P3305-2
70:30
28~38
40~50
~58
200℃/10°
No
Yes
Yellowing resistance, excellent mechanical performance and flow properties.
P3306-2
70:30
28~33
50~60
~56
180℃/15°
No
Yes
Good flow performance for glossy and matt-gloss products.
P3306-3
70:30
30~35
45~55
~60
200℃/10°
No
No
Medium curing, high Tg, good flow, suitable for high gloss effect product, outstanding mechanical properties.
P3307-2
70:30
30~35
40~50
~62
200℃/10°
No
Yes
Standard type resin, good comprehensive performance.
P3317
70:30
30~35
55~75
~58
180℃/10°
No
Yes
Medium curing, excellent flow, suitable for high gloss effect, good mechanical performance.
P3319
70:30
30~35
25~35
~56
160℃/10°
No
Yes
Low temperature curing, good flow and mechanical performance, suitable for high gloss effect.
P3323
70:30
30~35
40~50
~56
200℃/10°
No
No
Good flow,outstanding mechanical properties.Suitable for high gloss effect.
P3326
70:30
30~35
45~55
~60
180℃/10°
No
No
Medium curing, good flow, suitable for high gloss effect, outstanding mechanical performance.
P3403-2
60:40
48~53
25~35
~59
200℃/10°
No
No
Standard type resin, good comprehensive performance.
P3408
60:40
48~53
30~40
~58
180℃/10°
No
No
Yellowing resistance, excellent mechanical performance and flow properties.
P3413
60:40
48~53
30~40
~58
180℃/10°
No
No
Good flow, outstanding pigment wet properties and good storage stability.
P3501-2
50:50
70~76
30~40
~59
200℃/10°
No
No
Good balance of flow and mechanical properties and good pigment wetting.
P3502
50:50
70~75
30~40
~58
200℃/10°
No
No
Medium curing, good mechanical performance, special purpose of wrinkle finish.
P3503
50:50
60~65
30~40
~58
180℃/10°
No
No
Medium curing, good flow effect and mechanical performance.
P3504
50:50
58~65
20~30
~56
180℃/10°
No
No
Fast curing, good flow and mechanical performance.
P3505
50:50
65~75
20~30
~56
160℃/10°
No
No
Fast curing, good balance of flow and mechanical properties.
P3506
50:50
68~75
20~40
~60
200℃/10°
No
No
Medium curing, good flow ,good storage stability.
P3506S
50:50
68~75
20~40
~62
200℃/10°
No
No
Medium curing, good flow ,good storage stability,high Tg.
  • Previous:Epoxy Resins
  • ← Back
  • Next:Hydroxylated Polyester Resin
  • Polyester Resins

    TGIC Curing Resins
    HAA Curing Resins
    Hydroxylated Polyester Resin
    Hybrid Resins

    Epoxy Resins

    Epoxy Resins

    Additives

    Hardener Series
    Leveling Series
    Matting Series
    Special Additives

    Laser Particle Size Analyzer

    Laser Particle Size Analyzer I
    Laser Particle Size Analyzer II
    Laser Particle Size Analyzer III
    Laser Particle Size Analyzer IV
    erweima